Top Wellhead Equipment Co., Ltd.

Products Category
Contact Us

Tel: (281) 529-5066
Fax: (281) 529-5066
E-mail: sales@wellhead.us
Add: 8168 Mchard Road, Houston, TX, 77053, USA

Products

RISING STEM SLAB GATE VALVE

RISING STEM SLAB GATE VALVE RISING STEM SLAB GATE VALVE
Product name:RISING STEM SLAB GATE VALVE
Item:RSSGV001
Details:

SLAB GATE VALVE (RISING STEM)
The rising stem slab gate valves manufactured by Top Wellhead Equipment Co., Ltd. are available in temperature classes L, P, R, S, T, and U specified in API 6A. Gate valves to be used in the 350℉ or 650℉ high temperature can be supplied on request. Gate valves manufactured by our company are available in 3000psi, 5000psi and 10000psi working pressure, nominal size from 1-13/16" through 4-1/16",material classes from AA through FF, product specification levels (PSL) from 1 through 3 and performance requirement (PR) 1.
The rising stem slab gate valves manufactured by our company have the same characters as the non-rising stem slab gate valves. For it is designed by rising stem, the close and open of the valves is completely controlled .
SPECIFICATION:
● Manufactured and Tested in Accordance with API Spec 6A
●Simple structure and renewable gate and seat assembly.
●One-piece and double-acting gate with long service life.
●Both thrust bearings with large load capacity and composite rubber-plastic stem lip packing minimize operational torque.
●Bearing cap is provided with a grease cup to make it easy to inject lubricating grease in the field.
●Threaded packing gland allows removal of bearings and stem packing under line pressure.
●Both the bolted bonnet and modern bonnet seal ring provide simple structure and reliable sealing.
●The sealing surfaces of the gate and seat are hardfaced for wear and corrosion resistance.
●Wave springs are installed between the body and seat and between the gate and seat. The gate and seat still maintain a positive metal to metal seal under low pressure.
●Floating gate design requests the hand wheel to be backed off 1/4 turn after its rotation can go no further.
Note:
Under pressure, the valve is forbidden to be semi-shrouded, for it will do great harm to the gate valve and great reduce the service life of the valve.

 
5000psi Flanged Ends 10000psi Flanged Ends
PARTS LIST  

Item

Description

Qty

Material

Remark

1

Body

1

4130

 

*2

Seat

2

4130+HF

 

*3

Seat Seal Ring

4

NBR

 

*4

Wave Spring

2

410

 

*5

Gate

1

4130+HF

 

*6

Stem

1

410

 

*7

Bonnet Seal Ring

1

Steel

 

8

Bonnet

1

4130

 

*9

Grease Screw

1

Assy.

 

*10

Stem Seal Assy.

1

Assy.

 

11

Bonnet Stud

8

4140

 

12

Bonnet Nut

8

5140

 

13

Packing Gland

1

Steel

 

*14

Bearing

2

Assy.

 

*15

Stem Screw

1

Steel

 

16

Screw Housing

1

Steel

 

17

Lock Screw

1

Steel

 

*18

Lube Fitting

1

Assy.

 

*19

Sec. Seal

1

NBR

 

20

Hub Assy.

1

Steel

 

21

Stem Cap

1

Steel

 

*Major Repair------─ One Each For One Year’s Service